| |

|
|
Artistry In Glass :: BEADMAKING & FLAMEWORKING :: GLASKOLBEN ™ - BLOWN GLASS ORNAMENTS
Glaskolben ™
Create your own blown glass ornaments using the pre-formed glass cylinders by themselves, or in combination with the 3-dimensional molds.
Marver Glaskolben ™ with stringers, frits and powders. Paint them with glass paints, stains or lacquers. Heat cure with coloured enamels or apply decals to the finished ornament. Experiment using glass blowing molds for various shaped and designs. Endless possibilities exist.
COE 89
Glaskolben ™ is compatible with readily available COE 90 products from Uroboros or Bullseye.
ALSO CHECK:
UROBOROS FRITS & POWDERS
BULLSEYE FRACTURES (CONFETTI)
BULLSEYE FRITS
GLASKOLBEN ™ TUTORIAL
TIP:
If you are having problems with creating a nice ball without blowing a hole in the cylinder first, try rolling the cylinder in clear COE 90 frit as you are heating the cylinder. This will add thickness to the wall of the cylinder and should make it easier to complete the ornament.
| GLASKOLBEN ™ - BLOWN GLASS ORNAMENTS |
|
|
|